Mobile Cranes Inspections

Conventional All Terrain
Boom Truck Rough Terrain
Articulated Carry Deck
Mobile Gantry Cranes Digger Derricks
Specialty Cranes Load Tests

Conventional Crane Inspections
We inspect a wide variety of lattice boom cranes on crawlers and trucks as well. Typically we see Manitowoc, Link Belt, P&H, Bucyrus Erie, American, Terex and Northwest.
Conventional Crane Inspections

All Terrain Crane Inspections
There are a wide variety of all terrain cranes in the industry today. They range from the very basic models to the highly sophisticated.
Having a electro-mechanical background is a priceless asset when inspecting the entire spectrum of these cranes. Common manufacturers of this type of crane are Demag(pictured), Grove, P&H, Terex, Link Belt, Tadano, and Liebherr.
Boom Truck Inspections
A very popular crane, the boom truck is extremely versatile because of it's light weight, maneuverability and reach. This crane is probably used in the largest variety of industries in comparison to the other crane types. The required annual inspection of these cranes is generally critical due to their high volume of use. Manufacturers of this class of crane include: Manitex(pictured), National, Terex, JLG, Tadano, USTC and RO.

Rough Terrain Crane Inspections
This crane is probably best suited for the jobsite. It is outfitted with construction grade tires and suspension for travel over unfinished surfaces. This crane usually has the ability to pick and carry, a feature that makes it even more versatile on the job site. Popular manufacturers of this type crane are Terex (pictured), Grove (pictured), Tadano, Link Belt, P&H and Galion
Articulated Crane Inspections
The articulated crane is probably the one crane that comes in the largest variety of configurations. The articulating boom gives the operator the ability to work in close conditions. You can find these cranes outfitted with or without load ropes.
They also may have pallet forks, load hooks or grapples attached to the end of their booms. They are commonly used for delivering products such as building supplies, precast concrete, or logs. The many manufacturers include IMT (pictured), Fassi, Corm

Carry Deck Crane Inspections
Made for the workplace, the carry deck crane is usually capable of picking a load and traveling with it. This crane also has a flat deck that is designed to be used as a carrying surface. Manufacturers include Grove (pictured), Broderson (pictured), and Shuttlelift
Mobile Gantry Crane Inspections
We inspect a wide variety of lattice boom cranes on crawlers and trucks as well. Typically we see Manitowoc, Link Belt, P&H, Bucyrus Erie, American, Terex and Northwest.

Digger Derricks Inspections
The Digger Derrick was designed for a specific use. It is essentially a crane that comes with a hydraulic driven augur to dig holes in the ground for setting poles.

Some models come with pole claws, which assist in setting poles in the ground. This truck gives the operator the ability to plant poles in the ground, unassisted.

Manufacturers include Altec, Terex, Texoma, Pitman, and Atlas.
Specialty Cranes Inspections
Some cranes just don't fit into the major categories. Pictured here is a National boom attached to a Timberjack It is used for high-line work in the worst terrain. Also shown, is an Australian crane, Franna. The boom doesn't swing, it gets its side motion by articulating the trucks frame.

Load Tests
To prove out cranes computers accuracy requires a load test. Even though the LMI is an "operational aid", it must work properly. Years of experience performing these tests is the best way to explain our success rate when it come to not damaging cranes during this potentially risky test. Cranes with LMIs (Load Moment Indicators) must be tested annually. The picture depicts a 102 ton load test that was successfully completed.